PS3 Exploit 4.82 – FAT/Slim CFW No Downgrade

In past to jailbreak PS3 console, any of PS3 users have to downgrade his console and that wasn’t an easy task and not possible without any hardware such as cobra etc. According to our view, there is the less chance who’s on the 3.55 firmware. Approx all the PS3 users update his console via Internet or storage.  Now here is the great news the PS3 users they can Jailbreak his console with the help of PS3Xploit v3.0. I do lots of r&d on this and finally, I got the solution with my own experience. Now I want to share the same thing you and my users through this article. Please make sure you should follow the given process and steps as given in sequence, otherwise, you will face error in the installation. So, let’s starts with the PS3 jailbreak exploit through Webkit Exploit process introduction below.

There has been a lot of advancement going ahead around the PS3 since the revelations of the PS3Xploit (webkit exploit) on 4.81 OFW, first we seen the IDPS dumper (4.81/2 OFW) released with some enormous news and would like to join it, similar to a Flash Writer (downgrader) for OFW, so on the off chance that you have been hesitant to purchase a Hardware Flasher, for example, the E3 Flasher and bust open your PS3, yet have been needing to get your PS3 FAT(PHAT) Console and your Downgradable PS3 SLIM Models (up to and incorporating 25xx models with least installable form <= 3.56) on Custom Firmware, at that point here is your shot with a 100% working software because of worked by PS3Xploit Team.

Basically what this Software Solution does is compose a fix to the CoreOS (on NOR/NAND Chip) and when the PS3 Console is then rebooted you can introduce a Custom Firmware specifically, rather “Coordinate OFW to CFW fixing” is done to take into account Custom Firmware Installation. Since this adventure is executed from 4.82 OFW, you can just introduce a 4.82 CFW. Be that as it may, in the event that you wish to utilize a prior firmware. So, Just go with the below-mentioned steps and jailbreak your console.

It would be ideal if you read first:-

• It’s essential not to surge the browser memory with junk before running the exploit. The purpose behind this is expected to JavaScript core memory use confinements we are filtering a few times a little scope of program memory to locate some basic information in RAM, if the memory is overflowed then the range to examine turns out to be substantially bigger and the probabilities that our information is found in the littler range diminish drastically.
• So, never utilize the browser or set a homepage you cancel before running the exploit.
• In the event that you have to, set the home page to ‘clear’, shut the browser at that point revive it to begin the flash writer.

Important: Some PS3 consoles-Super Slim have NOR format, but still they are not jailbroken by this process, we are trying for that also, and once we get success then we surely intimate you. 

Read about v1.0.0 – Initial Release:-

• Support Direct OFW to CFW fixing for All Phat and 2xxx Slim.
• NOR/NAND will simply copy 3MBb of CoreOS information to both ros0 and ros1 in the flash drive.
• There is just a single version released for 4.82. A similar hex patch file can be utilized on NOR and NAND.
• It’s as safe as possible, with a check for USB device and patch file making the exploit.
• If there should be an occurrence of corruption, it’s just a partial brick on the grounds that no per console information ever gets erased so a hardware flasher could even now be utilized if at any point a recovery reboot was impossible.

Read below-mentioned tips for jailbreak:-

• Try utilizing a LAN connection or a strong WiFi connection at the time of exploitation. A low or weak signal will cause issues.
• If the exploit takes over 5 minutes to work, reload the page, browser, or restart console and attempt once more.
• If you are utilizing a LAN connection and experience network issues, ensure all links to switch are in working order.

Installation Process:

1. You need a minverchk file and extract it (you got the PS3UPDAT.PUP file).
2. Connect USB Flash Drive to your PC and format with FAT32.
3. Make a folder PS3 and under it make another folder UPDATE.
4. Inside the UPDATE folder put PS3UPDAT.PUP file.
5. Take out the USB flash drive from your PC.
6. Plug the USB flash drive to your PS3 console right most USB port nearest to BD drive.
7. Go to the setting and select system update.
8. Select Update via Storage media and click OK.
9. The system will show you the current software version of your console.
10. If your system version is 4.81 OFW or lower, then first you need to update it.
11. Update your version over the internet or by USB flash drive is up to you.
12. After success update of console version 4.82 OFW, it will restart automatically.
13. Remove your USB flash drive from PS3 console and connect to your PC.
14. You need NAND/NOR Writer for 4.82. file, Extract it.
15. Open hex-482-folder and copy flsh.hex file and paste to USB flash drive.
16. Delete PS3UPDAT.PUP folder user PS3>Update from the USB flash drive.
17. Now you need CFW REBUG_4.82.1 LTE,  rename it PS3UPDAT.PUP file.
18. Copy and paste new PS3UPDAT.PUP file into PS3>UPDATE folder on your USB flash drive.
19. After copy and paste this file plug out USB flash drive from your PC.
20. Plug-in USB to your PS3 console right most USB near to BD drive.
21. Open your console browser. Open homepage and set the blank page.
22. If you have Slim PS3 console then enter the address: http://redthetrainer.com/ps3/norNandWriter/nor-482.html (This website no longer exist) Use HTTP server MiniWeb
23. If you have Early FAT PS3’s console then enter the address: http://redthetrainer.com/ps3/norNandWriter/nand-482.html (This website no longer exist) Use HTTP server MiniWeb
24. Make sure the address put in your console address bar as it is. Because of this address in character sensitive.
25. Please choose address as per your console type and process. JavaScript OK.
26. Maybe the process failed for the first time. Reload or refresh.
27. Once the process start does not turn off. Just sit back and relax until your PS3 console will restart yourself.
28. You will get message the file system storage may be corrupted press cancel from your console.
29. Now go to PS3 menu > system update > update via Storage media.
30. Press OK on Update > License agreement OK> Accept.
31. Turn off system automatically after update select and OK.
32. You do not turn off the PS3 console.
33. For Check new version, Now go to system settings > system information.
34. Congratulation your system.

Summary:– Finally we hope that you learn all about the PS3 Webkit Exploit (PS3Xploit v3.0) process. Further, if you any assistance on this please let me know. I will get back to you as possible. Please like and share our Facebook page and also subscribe our push notification and always stay connected with us.